逸动dt的大灯调节方法（逸动dt灯光操作图解）「

　　逸动dt的大灯调节方法（逸动dt灯光操作图解）「热点」

　　最近有很多热心网友都十分关心逸动dt的大灯调节方法（逸动dt灯光操作图解）「热点」这个问题。还有一部分人想了解逸动dt灯光操作图解。对此，和记百科小编「清风南趋」收集了相关的教程，希望能给你带来帮助。

逸动dt的大灯调节方法

　　将车开到平路上，打开近光灯，近光灯的点调在30米距离并两点重合，远光点调到与地面平行；用墙是调两个远光点平行的，将车停在车头与墙7.6米远的位置，确保地面水平，汽车和墙垂直。测出地面到大灯中心的高度及两个大灯之间的距离。

　　在墙比大灯低0.1米的地方张贴一个水平遮蔽胶带，并确保胶带在汽车的正中间。调整垂直调节螺丝，直到大灯光束位于墙胶带的中间。继续调整垂直调节螺丝，直到大灯光束径直向前，为确保调整的正确，测出墙离光束的高度和大灯的高度，确保两者的数值相等。

逸动dt灯光操作图解

　　长安逸动开启自动大灯方法是：大灯开关位于灯光控制杆上，将开关拧至AUTO挡，自动大灯功能便会启动，当夜间开车或进入隧道时，大灯会根据情况自动开启或者熄灭大灯。自动大灯是一些厂商为了方便驾驶者，在前大灯上安装了感光控制系统。当感光控制系统感应到外界光线强度大于或小于一定值时，向ECU发出电子信号，从而控制汽车大灯的亮起或熄灭。

　　【英文介绍/For English】：

　　Drive the car to a flat road, turn on the low beam, adjust the low beam point at a distance of 30 meters and coincide with the two points, and adjust the high beam point to be parallel to the ground; when using a wall, adjust the two high beam points to be parallel, and turn the car on. Park the front of the car 7.6 meters away from the wall, making sure the ground is level and the car and the wall are vertical. Measure the height from the ground to the center of the headlights and the distance between the two headlights.

　　Put a horizontal masking tape on the wall 0.1 meters below the headlights, and make sure the tape is centered on the car. Adjust the vertical adjustment screw until the headlight beam is centered on the wall tape. Continue to adjust the vertical adjustment screw until the headlight beam is straight forward. To ensure correct adjustment, measure the height of the wall from the beam and the height of the headlight, and ensure that the two values ​​are equal.